U-Boot 1.1.4 (Dec 20 2006 - 19:26:04)

U-Boot code: 00C00000 -> 00C25514  BSS: -> 00C56D38
RAM Configuration:
Bank #0: 00900000 64 MB
Manuf. ID @ 0x00100000: 0x000000b0
## flash_init: unknown manufacturer
flash_protect ON: from 0x00100000 to 0x00125513
flash_protect ON: from 0x00130000 to 0x0013FFFF
Flash:  0 kB
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
DM320 Rev. B/C
Neuros Technologies OSD Controller (c) 2005
Ingenient Technologies NTSC/PAL Video Controller (c) 2005
Ingenient Technologies LCD Controller (c) 2005
Configuring video encoder for NTSC
CFG_FLAG_ADDR = 1700000
CFG_PACKAGE_ADDR = 1701000
Bus 0: not available  Status = 0x20 
ide_read dev 0 start 0, blocks 1 buffer at BCFD38
Powersaving A0
Error (no IRQ) dev 0 blk 0: status 0x20
** Can't read from device 0 **
No MS card found
### main_loop entered: bootdelay=3

### main_loop: bootcmd="<UNDEFINED>"
m:robe 500i >  help
?       - alias for 'help'
autoscr - run script from memory
base    - print or set address offset
bdinfo  - print Board Info structure
boot    - boot default, i.e., run 'bootcmd'
bootd   - boot default, i.e., run 'bootcmd'
bootm   - boot application image from memory
cmp     - memory compare
coninfo - print console devices and information
cp      - memory copy
crc32   - checksum calculation
diskboot- boot from IDE device
echo    - echo args to console
erase   - erase FLASH memory
fatinfo - print information about filesystem
fatload - load binary file from a dos filesystem
fatls   - list files in a directory (default /)
flinfo  - print FLASH memory information
go      - start application at address 'addr'
help    - print online help
ide     - IDE sub-system
iminfo  - print header information for application image
imls    - list all images found in flash
itest	- return true/false on integer compare
loadb   - load binary file over serial line (kermit mode)
loads   - load S-Record file over serial line
loop    - infinite loop on address range
md      - memory display
mm      - memory modify (auto-incrementing)
mmc_sd_init - init mmc/sd card
ms_init - init ms card
mtest   - simple RAM test
mw      - memory write (fill)
nm      - memory modify (constant address)
printenv- print environment variables
protect - enable or disable FLASH write protection
reset   - Perform RESET of the CPU
run     - run commands in an environment variable
saveenv - save environment variables to persistent storage
setenv  - set environment variables
sleep   - delay execution for some time
version - print monitor version
m:robe 500i >  version

U-Boot 1.1.4 (Dec 20 2006 - 19:26:04)
m:robe 500i >